Member States relating to electrical from this product at all times. equipment for use within certain Manufactured voltage limits. Hannspree cannot Installation under license from accept responsibility for any Dolby Laboratories. Dolby and the • Do not place the TV in locations...
Page 3
Accordingly, and to the extent allowed by applicable law, any copyrighted software contained in the product described herein shall not be distributed, modified, reverse engineered, or reproduced in any manner without the prior written authorization of Hannspree (or of other third parties). The Hannspree logos presented herein are trademarks of Hannspree. All other product names, trademarks or logos mentioned herein are used for identification purpose only, and may be the trademarks or registered trademarks of their respective owners.
VGA monitor cable with ferrite shield. Preface Thank you for purchasing a Hannspree LED TV. Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology. Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and correct installation and operations of the TV, it is important that the safety and operation instructions in this manual are followed.
1. Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. User’s manual Quick start guide Warranty card INPUT LAST Pro.LIST INFO MENU EXIT...
Installing the LED TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Hannspree bears no responsibility for improper mounting or mounting that results in accident or injury. You can ask a...
Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Hannspree is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own.
Control Panel INPUT No. Description Button Function Power Press to turn the TV on or off. Source INPUT Press INPUT to display the input source list. Press to turn the on-screen display (OSD) menu on / Menu MENU off. Press to increase the program number or move upward to the previous item on the OSD menu.
Input and Output Jacks Please refer to the front cover illustration for the Input & Output location. No. Description Connector Function Connect to a CI device. CI SLOT Antenna Connect to an antenna. DTV/TV CABLE/ANTENNA Connect to a USB device such as a USB flash drive.
Remote Control Arrows INPUT Press to select the input Press INPUT signal type selections. navigate in the main menu, to select menu options, to Keypad set functions, and to change Press to select a program values. directly. Press 0-9 to enter the program numbers (press can also be used to open the LAST...
2. Setting up your TV Power Connection Connect the power cord to the AC IN input jack on the rear of the TV. Insert the plug at the other end of the power cord into a power outlet. Rear Connections See the illustration and table below for device connection instructions.
Using the TV Turning the TV On and Off Press on the control panel or remote control to turn the TV on. Press again. The power LED turns red, indicating that the TV is off. Running Setup Wizard The Setup Wizard is displayed on the screen when you turn on your LED TV for the first time. Note: •...
Press OK when initial setup is completed. l a i Congratulations !! Completed Initial Setup. Please press [OK] to exit the wizard. Back Selecting Your Content Source You can watch cable or broadcast TV, play DVD or connect to your Source To select the source signal: •...
Setting Up Your Favorite Channels Press FAV. Press p/q to select empty item. Then press FAV to add current channel to favorite list. n Press p/q to select the channel you want to delete. Then press FAV to remove the channel from favorite list.
3. Adjusting On-Screen Display (OSD) Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed conveniently through the buttons on the remote control. Before going into details of each OSD option, you may get acquainted with the placement of the OSD system: Main Menus: Display the main menus.
On-Screen Menus Selection Follow the instructions indicated on the left side of the OSD Function Menu. • Press on the control panel or p/q arrow keys to scroll through the menus. • Press VOL + on the control panel or the u arrow key to enter a correspond submenu. VOL +/VOL - on the control panel or the t/u arrow keys to adjust the desired •...
Page 17
Audio Option Description Adjust the sound balance between the left and right Balance speakers (-50~50). Bass Adjust the audio bass setting in millisecond (0~100). Treble Adjust the audio treble setting in millisecond (0~100). Sound Surround Enable/Disable the Sound Surround feature (On/Off). Select a preset audio option optimized for different Sound Mode sounding conditions (Rock/Pop/Live/Dance/Techno/...
Page 18
Setup Option Description OSD Language Set the on-screen display language. Select the aspect ratio of the display Aspect Ratio (16:9/4:3/Zoom1/Zoom2/Auto). Enable/Disable the Blue Screen function. If Blue Screen Blue Screen is enabled, the screen will turn blue and the sound will be muted when no signal is received (On/Off).
Page 19
Subtitle Subtitle Enable/Disable the subtitle (On/Off). Digital subtitle Set the subtitle language for digital language broadcast. Digital subtitle language 2nd Subtitle type Select the subtitle type mode (Normal/Hearing impaired). Teletext Digital Teletext Set the subtitle language for digital Language broadcast. Decoding page Set the decoding page language for Language...
Media Center Menu Your TV is equipped with a USB connector that enables you to view photos, listen to music, or watch videos stored on a USB storage device. DTV/TV CABLE/ANTENNA Device File Format USB 2.0 device USB memory, USB card reader File System FAT/FAT 32/NTSF Photo file format...
Time Shift Function Allows you to record the TV program so that you won’t miss the favorite part even if you go out. Before you use the function, connect a USB device to the TV first. For the first time, you should do the disk setup for the USB device. Switch the input source to DTV mode. Press to pause the picture and begin the time shift.
4. Troubleshooting Situation Solution • Connect the power cord properly. • Check if the power LED is on or not. • Press on the control panel or the remote control. • Press INPUT on the remote control to select the No picture and sound.
5. Support Timing PC Mode Support Timing Mode Resolution Frequency SL22D SL24D 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1280 x 720 60Hz 1280 x 960 60Hz 1280 x 1024 60Hz 1360 x 768 60Hz 1440 x 900 60Hz 1680 x 1050...