Display - Honda 2012 CR-Z Navigation Manual

System Setup

Display

There are two screen display modes:
Day Mode Night Mode
Day and Night. The recommended
setting is Auto, which automatically
switches the screen between Day and
Night modes as you turn the headlights
on or off.
You can select Day or Night mode to
override the Auto mode. This is a
useful feature for drivers that like to use
headlights during the day and want to
temporarily override Night mode.
However, the screen in Day mode will
be extremely bright at night.
76
Navigation System
Display How setting affects
Mode display mode:
Auto
Automatically switches
between Day and Night
(factory
default) mode by sensing if the
headlights are on.
Day Stays in Day mode.
Night Stays in Night mode.
Clock
Displays the clock on
the screen.
To override setting But remember:
while driving:
Override night display: Adjust the dash
Adjust dash brightness brightness (with
(with headlights on) to headlights on) back to
full bright. normal to allow auto
Override day display: switching by sensing
Turn on headlights and headlights.
ensure the dash
brightness is not at full
bright.
There is no auto Night/
Push and hold the
Day mode change with
joystick for 10 seconds
(switches to Night
the headlights on/off.
mode). You control the setting.
There is no auto Night/
Push and hold the
Day mode change with
joystick for 10 seconds
(switches to Day mode).
the headlights on/off.
You control the setting.
To return to the previous Remember, your route
screen, press the NAVI
guidance stops when the
BACK button. clock screen is
displayed.