Table of Contents
Advertisement
b. TV/Monitor
Symptom
No power
No picture
No sound
Color distortion
Pictures/sound are
interfered
Remote control no
function
Screen
glittering
under PC mode
Screen traversed
under PC mode
Remedy
1. Check whether the power plug is connected to the power
supply.
2. Pull out the plug and wait for 60 seconds, and then insert
the power plug again and switch on the TV/monitor.
1.
Check whether the antenna is connected properly.
2.
Adjust to another channel.
3.
Change the length and the contrast setting.
4.
Make sure that the AV picture input cable is connected
properly.
1.
Increase the volume value.
2.
Check whether the TV is at MUTE mode.
3.
Make sure that the sound system setting is proper.
4.
Ensure the AV audio signal input cable is connected
properly.
1.
Ensure that the equipment is connected properly.
2.
Ensure that the AV video signal input is connected
properly.
1.
Check whether the equipment is connected properly.
2.
Adjust the antenna if use an outdoor antenna.
1.
Make sure that the batteries are installed with correct
polarities.
2.
Clean the remote sensor.
3.
Ensure that there is no foreign object between the
remote control and the sensor.
4.
Operate the remote control at a distance not more
than 6 meters from the remote sensor
Reset the computer and enter into the safety mode, then
select the appropriate screen type by consulting the
operation manual.
Maybe the phase is not appropriate. Enter into the PC
setting and change to correct level.
29
Advertisement
Table of Contents
