Grace Digital ALLEGRO GDI-IRD4000 User Manual page 20

5. Turn the knob until the display says <Set Time/Date>
6. Press the 'Select' button.
7. Turn the knob until the correct time zone is seen on the display. Push the 'Select' button to set your
time zone. Then turn the Menu knob until the hour setting is correct, then press the 'Select' button.
8. Turn the knob until the minute setting is correct, then press the 'Select' button.
The display shows <Set Time> with the new time shown beneath for 3 seconds, then returns to the
menu, press the 'Back' button 2 times to go to the main menu.
20
< Set Time/Date
Set Alarm
DST
Pacific
Central
Eastern
Set Time
1:30 PM
Set Time
1:34 PM
>