Goldmund EIDOS 36U User Manual page 10

Universal

Hide thumbs Also See for EIDOS 36U:

Table of Contents

Enlarged version

6 6 6 6

BACK PANEL CABLE CONNECTIONS (Ctd.)

Analog connection: Connecting to a Receiver/Amplifier in

Analog 7.1/5.1 mul

Analog 7.1/5.1 multichannel

Analog 7.1/5.1 mul

Please use 8 interconnect cables to connect the FRONT-L (Front Left), FRONT-R

(Front Right), SURR-L (Surround Left), SURR-R (Surround Right), Center, SUB

(Subwoofer), REAR-L (Surround Back Left) and REAR-R (Surround Back Right),

analog output terminals of the Eidos 36U+ to the corresponding multi-channel analog

audio input of your A/V receiver or amplifier. If the A/V receiver or amplifier only has

5.1ch audio input, the REAR-L (Surround Back Left) and REAR-R (Surround Back

Right) terminals do not need to be connected and set the Down Mix option in the

Setup Menu to 5.1ch to make sure that any 7.1 channel signals are converted to 5.1

channels. Goldmund recommends using Goldmund Interco cables.

Connecting to a Stereo Audio System

If your audio system only offers stereo audio inputs, or if you would like to connect a

dedicated stereo system in addition to the surround system, you can connect it to the

FRONT-L & FRONT-R audio output terminals of the player.

NOTE

The stereo audio output terminals will always provide a down-mixed stereo signal

from multi-channel sources. The "Down Mix" and other speaker settings in the Audio

Processing Setup Menu do not affect the stereo audio output.

Speaker Configuration applies to the multi-channel analog audio outputs only. All

digital bitstream and LPCM outputs are unaffected by these settings.

tichannel

GOLDMUND EIDOS 36U+ – Universal Player -

Table of Contents

Show Quick Links

Table of Contents