Precor P30 Console Operating & Maintenance Manual page 82

28
Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 823
3. Insert the right handlebar into the handlebar clamp until
4. Apply pressure to the handlebar and rotate it back and
5. Slide the inner handlebar cap onto the lower handlebar.
6. Thread one hex head screw through the handlebar and
7. Repeat steps 1 through 7 to attach the opposite
To tighten the handlebars completely:
1.
2. Use a ³₁₆-inch hex wrench to tighten the two handlebar
the foam grip touches the side of the handlebar clamp.
forth to ease it into the handlebar clamp.
handlebar mount. Partially tighten the screw.
Figure 16: Handrail attachment detail
handlebar.
Use the wrench included with the unit, or a 1³₈-inch
socket, box, or open-end wrench, to tighten the handlebar
screws fully.
clamp fasteners fully.