Table of Contents
Advertisement
MAINTENANCE
AND TROUBLESHOOTING
VCR MODE CHART
1. OUTPUT
TO TV FROM ANTENNA
OUT JACK ON VCR
ANTENNA
OR CABLE-TV
INPUT TO VCR
The operating mode of your VCR determines
what type of
a program source is provided, and whether the audio is
stereo or monaural. Use this flow chart to determine the
operating status of your VCR, so that you can select the
proper viewing source and channel on your TV. Select the
VCR output channel (3 or 4) on your TV to view tapes or to
see programs selected by using the channel tuner in tile
VCR.
During tape playback, we recommend
you use the AUDIO
and VIDEO output jacks on your VCR for improved per-
formance.
VCR POWER
IS OFF
VCR POWER
IS ON
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO TV
STEREO
AUDIO
IF TV IS
CAPABLE
SWITCH IN TV
POSITION
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO TV
STEREO
AUDIO
IF'I'VIS
CAPABLE
SWITCH IN VCR
POSITION
TV/VCR switch may be
marked W/VIDEO
on some VCRs.
NO
VCR TUNER
SELECTS
CHANNELS
TO
BE SEEN ON TV
CHAN 3/4
YES
VIDEO TAPE
PROVIDES
PROGRAM
TO
BE SEEN ON TV
CHAN 3/4
MONAURAL
AUDIO
ONLY
MONAURAL
AUDIO
ONLY
VCR ANTENNA
OUTPUT TOTV
VCRMODE3
10 - 3
Advertisement
Table of Contents
