Clock Set; Captions - Zenith SENTRY 2 SL2518RK Operating Manual & Warranty

Sentry 2 mts stereo color tv with remote control and closed captions
Hide thumbs Also See for SENTRY 2 SL2518RK:
Table of Contents

Advertisement

SETUP MENU
CLOCK SET
Purpose
Sets the clock in the TV to the correct time.
After the time has been set, the current time will appear on
the Channel/Time
display whenever the TV is turned on,
the channel is changed, or ENTER (ENT) is pressed.
Power Failure Note: The time will have to be reset if power
to the TV is interrupted.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
AUTO RNE ]LINE
._ CLOCK
SET
CAP]IONS
CH. BACKGROUND
Selecting
Clock Set
To Use CLOCK
SET from Remote
Control
1. CLOCK
SET
should
be selected
if you followed
the
"Basic
Menu
Operation"
given
in the
"On-Screen
Menus"
section.
2. Use
the numbered
buttons
on the remote
control
to
enter
the current
time.
Press
ENTER
(ENT)
to start
the clock.
For example,
to set the clock
to 12:30,
press
1, then
2, then
3, then
0; and
then
press
ENTER
(ENT).
If
you enter
an invalid
time,
such
as 14:35
or 2:80,
the
time
will disappear
and
you can enter
another
time.
To Use CLOCK
SET from Control
Panel
1. CLOCK
SET
display
should
be shown
on the TV if
you followed
the "Basic
Menu
Operation"
given
in
the "On-Screen
Menus"
section.
2. Use ADJUST
(ADJ)
Left/Right
to set the time,
and
then
press
ENTER
(ENT)
to start
the clock.
CAPTIONS
Purpose
Displays closed captions (CC) or informational
text when
available on the selected channel.
To Access CAPTIONS
Indirectly (All Models)
1. CAPTIONS
should
be selected
if you followed
the
"Basic
Menu
Operation"
given in the "On-Screen
Menus"
section.
2. One
of five different
selections
is shown:
OFF,
CAPTION
1, CAPTION
2, TEXT
1 and TEXT
2.
3. Press ADJUST
(ADJ)
Left/Right
to select
desired
mode of operation.
4. The display
disappears
from
the screen
automat-
ically in about
10 seconds,
or you may press ENTER
(ENT)
to remove
the display
immediately.
To Access CAPTIONS Directly (Select Models)
1. Press CAPTIONS
or CC/QUIT
on the remote con-
trol to select CAPTIONS.
One of five different selec-
tions
is shown:
OFF,
CAPTION
1, CAPTION
2,
TEXT
1 and TEXT 2.
2. Press ADJUST
(ADJ)
Left/Right
to select desired
mode of operation.
3. The display
disappears
from the screen
automat-
ically in about 10 seconds,
or you may press ENTER
(ENT)
to remove the display immediately.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
TUNING BAND
AUTO FINE TUNE
CLOCK
SET
÷ CAPnONS
CH. BACKGROUND
OFF
Selecting Setup Menu
and Captions Option
zs8o-o
8 - 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sentry 2 sl2502rk

Table of Contents