Basic Picture-In-Picture Operation - Zenith SYSTEM 3 SY2738RK Operating Manual & Warranty

PIP CONNECTIONS AND OPERATION
BASIC PICTURE-IN-PICTURE OPERATION
This illustration shows the basic connection of your TV
to a stereo VCR. With your equipment setup in this man-
ner, your television has the following PIP capabilities:
El Simultaneously view a video tape playing in the
VCR and a channel selected by the TV's tuner.
121 Simultaneously view two different channels; one
selected by the TV's tuner and another using the
VCR's tuner.
121 Swap the main picture and the PIP inset.
Viewing Two Different
Channels
1. Set VCR's TV/VCR* switch
to TV.
2. Select Main Source in the Source
Menu.
3. Press a LetVRight arrow to select
Antenna/Cable.
4. Select PIP Source in the Source
Menu.
5. Press a Left/Right arrow to select
Video.
6. Press QUIT to remove the menu
from view.
7. Press PIP key to activate PIP.
8. Select a TV channel using the
TV's channel selector.
9. Select a PIP channel using the
VCR's channel selector.
* May be labeled TV/Video.
Viewing a Video Tape
and a TV Channel
1. Set VCR's TV/VCR* switch
to TV.
2. Select Main Source in the Source
Menu.
3. Press a Left/Right arrow to select
Antenna/Cable.
4. Select PIP Source in the Source
Menu.
5. Press a Left/Right arrow to select
Video.
6. Press QUIT to remove the menu
from view.
7. Press PIP key to activate PIP.
8. Select a TV channel using the
TV's channel selector.
9. Play a video tape in the VCR and
view it in the PIP window.
VIDEO Source
Connect to the AUDIO/VIDEO
Input jacks.
Antenna/Cable
Source
Connect to the ANTENNA/
CABLE jack.
TV BAC K
CABLE A
VCR BACK
Option 1: Antenna or Direct Cable Connection to VCIL
(Cables are not supplied with television.)
3o5o-B 11 _ 2