Table of Contents
Advertisement
IMPORTANT
SAFETY
INSTRUCTIONS
Your product has been manufactured
and tested with your safety in mind. However,
improper use can result in potential
electrical shock or fire hazards. To avoid defeating the safeguards
that have been built into your new product, please
read and observe the following
safety points when installing
and using your new product, and save them for future refer-
ence.
Observing
the simple precautions
discussed in this section of the operating
guide can help you get many years of enjoy-
ment and safe operatio n that are built into your new product.
1.
Read
Instructions
All the safety
and operating
instructions
should
be read before
the product
is operated.
2.
Foilow
Instructions
All operating
and use instructions
should
be
followed.
3.
Retain
Instructions
The safety and operating
instructions
should
be retained
for future reference.
4.
Heed Warnings
All warnings
on the product
and in the operat-
ing instructions
should be adhered
to.
5.
Clleaning
Unplug
this product
from the wall outlet be-
fore cleaning.
Do not use liquid cleaners
or
aerosol
cleaners
Use a damp cloth for clean-
ing.
6.
Water
and Moisture
Do not use this product
near water -- for ex-
araple, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement,
or
near a swimming
pool.
7.
Accessories
Do not place this product on an unstable
Cart,
stand, tripod,bracket,
or table. The product
may fall, causing
serious
injury to a child or
adult, and serious
damage
to the product.
Use
only with a cart, stand,
tripod, bracket,
or ta-
ble recommended
by the manufacturer,
or sold
with the product.
Any mounting
of the product
should follow
the manufacturer's
instructions,
and should use a mounting
accessory
recom-
mended by the manufacturer.
8.
Transporting
Product
A product
and cart combina-
_._
tion should
be moved
with
care. Quick
stops,
excessive
force,
and uneven
surfaces
may
cause
the product
and cart com-
PoRrx_tt CART WA_INGbination
to overturn.
9.
Attachments
I2,o not use attachments
not recommended
by
the product
manufacturer
as they may cause
h azards.
10.
Ventilation
Slots and openings
in the cabinet
are provided
fi_r ventilation
and to ensure
reliable
operation
of the product and to protect it from overheat-
ing, and these
openings
must not be blocked
or covered.
The openings
should
never be
blocked
by placing
the pi'oduct
on a bed, sofa,
rug, or other
similar
surface.
This product
slhodld not be placed
in a built-in
installation
such as a bookcase
or rack unless
proper
venti-
lation
is provided
or the manufacturer's
in-
structions
have been adhered
to.
11.
Power
Sources
This product
should
be operated
only from the
type of power
source
indicated
on the marking
label.
If you are not sure of the type of power
supply to your home,
consult
your product
dealer
or local power
company.
For products
intended
to operate
from battery
power,
or
other sources,
refer to the operating
instruc-
tions.
12.
Line-Cord
Polarization
This product
is equipped
with a polarized
alter-
nating-current
line plug (a plug having
one
blade wider than the other).
This plug will fit
into the power
outlet
only one way. This is a
safety feature.
If you are unable
to insert
the
plug fully into the outlet,
try rew:rsing
the
plug. If the plug should
still fail to fit, contact
your electrician
to replace
your obsolete
out-
let. Do not defeat
the safety purpose
of the po-
larized
plug.
13.
Power-Cord
Protection
Power-supply
cords should
be routed so that
they are not likely to be walked
on or pinched
by items placed
upon or against
them, paying
particular
attention
to cords at plugs, conven-
ience receptacles,
and the point
where
they
exit from the product.
14.
Outdoor
Antenna
Grounding
If an outside
antenna or cable system
is con-
nected to the product,
be sure the antenna or
cable system
is grounded
so as to provide
some protection
against voltage
surges
and
built-up
static charges.
Article
8 l0 of the Na-
tional Electrical
Code (U.S.A.),
ANSI/NFPA
70 provides
information
with regard to proper
grounding
of the mast and supporting
struc-
ture, grounding
of the lead-in
wire to an an-
tenna discharge
unit, size of grounding
conductors,
location
of antenna-discharge
unit, connection
to grounding
electrodes,
and
requirements
for the grounding
electrode.
See
figure on next page.
15.
Lightning
For added protection
for this product (re-
ceiver)
during
a lightning
storm, or when it is
left unattended
and unused
for hmg periods
of
time, unplug it from the wall outlet
and discon-
nect the antenna or cable system.
This will pre-
vent damage
to the product due _o lightning
and power-line
surges.
GA-SAFE
ill
•
a.
Advertisement
Table of Contents
