Table of Contents
Advertisement
SECTION 4: KNOW YOUR LAWNMOWER
Read this operator's manual and safety rules before
operating your lawn mower. Compare the illustration in
Figure 7 with your lawn mower to familiarize yourself
with the location of various controls and adjustments.
Save this manual for future reference.
WARNING:
The
operation
of any
lawn
mower can result in foreign objects being
thrown into the eyes, which can damage
your eyes severely.
Always wear safety
glasses
while
operating
the mower,
or
while
performing
any
adjustments
or
repairs on it.
EngineControls
See the separate engine manual for the location and
function of the controls on the engine.
BladeControl Handle
The blade control handle is located on the upper handle
of the mower. The blade control handle must be
depressed in order to operate the unit. Release blade
control handle to stop engine and blade.
RecoilStarter
The recoil starter is attached to the right lower handle.
Stand behind the unit and pull the recoil starter to start
the unit. See Figure 7.
CuttingHeightAdjustmentLevers
These levers are located on each wheel and they are
used to adjust the cutting height. All four levers have to
be at the same relative position to ensure a uniform cut.
See Figure 7.
DriveControl Handle
The drive control handle is located on the upper handle.
Squeeze the drive control handle against the upper
handle to engage drive system. Release the control
handle to disengage the drive system in order to stop,
slow down, or backup. See Figure 7.
Stopping Engine
•
Release blade control handle to stop the engine
and the blade.
•
Disconnect spark plug wire and ground against the
engine.
_,
WARNING: This blade control mechanism
is a safety device. Never attempt to bypass
its operations.
Starter
Blade Control
Handle
Handle
Mulching
Plug
Cutting Height
Adjustment
Lever
Discharge_
Chute
Figure 7
Advertisement
Table of Contents
