Mps Version Control For Os - Foxconn P4M8907SA User Manual

vFirst/Second/Third Boot Device
This option allows you to set the boot device's sequence.
vBoot From Other Device
W ith this function set to enable, the system will boot from some other de-
vices if the first/second/third boot devices failed. The setting values are: Dis-
abled and Enabled.
vBoot Up Floppy Seek
This option controls shether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (eiter due to improper configuration or physical
unavailability), it will appear an error message. The available setting values
are: Disabled and Enabled.
vBoot Up NumLock Status
This option defines if the keyboard Num Lock key is active when your system
is started. The setting values are: On and Off.
vTypematic Rate Setting
If this option is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard. The avail-
able setting values are: Disabled and Enabled.
vTypematic Rate (Chars/Sec)
Use this option to define how many characters per second a held-down
key generated.
vTypematic Delay (Msec)
Use this option to define how many milliseconds must elapse before a held-
down key beings generating repeat characters.
vSecurity Option
W hen it is set to "Setup", a password is required to enter the CMOS Setup
screen; W hen it is set to "System", a password is required not only to enter
CMOS Setup, but also to start up your PC.
v

MPS Version Control For OS

This option is used to set up the version of MPS Table used in NT4.0 OS.
Chapter 3 BIOS Description
29