Product Profile; Important Safety Instructions - Fellowes PS60-2 Owner's Manual

Product Profile

This product is built to shred paper, staples, small paper clips
and credit cards. It is not built to take large paper clips, contin-
uous forms, adhesive labels, transparencies, newspaper, card-
board or any plastic other than credit cards. Using it for these
purposes is likely to cause irreparable damage.
Sheet capacity*
Paper shred size
Maximum paper width
Recommended daily capacity
Maximum running time
Automatic cool-down period
Voltage
*Based on 20 lb., 8-1/2" x 11" paper with shredder operating at rated voltage; heavier paper, high humidity, or other than
rated voltage may reduce sheet capacity.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING
While setting up shredder
• Check shredder for damage or defects; some paper particles in the basket are normal
due to product testing and does not indicate a defect.
• Avoid touching exposed blades on underside of confetti-cut shredder head.
• Plug power cord in an outlet that can easily be reached.
• Do not place shredder near or over a heat or water source.
While operating shredder
• Keep hands and hanging objects (jewelry, ties, loose clothing,
long hair, etc.) away from paper entry.
• Keep children and pets away from the shredder.
When not in use
• Always turn off and unplug shredder
• Unplug before emptying basket
• Do not open shredder head: Danger of electric shock.
NOTE: Do not use flammable synthetic oil, petroleum-based products or aerosols of any
kind on or near product at any time.
Strip-cut
(PS60-2)
12 sheets
7/32" (5.8 mm)
9" (229 mm)
25-50 shredding passes
10-12 minutes
20 minutes
120V/60H/2.5A
Confetti-cut
(PS60C-2)
8 sheets
5/32" x 1-3/8" (3.9 x 35 mm)
9" (229 mm)
120V/60H/5.0A
3