Creating And Configuring A Routed Wm-Ad - Extreme Networks Summit WM Getting Started Manual

Creating and configuring a Routed WM-AD

The user traffic is tunneled to the Summit WM Controller in Routed WM-AD type. This is the default
set-up.
To create and configure a Routed WM-AD type:
1 From the main menu, click WM-AD Configuration. The WM-AD Configuration screen is displayed.
2 In the Add subnet text box, type the WM-AD name.
3 Click Add subnet. The name is displayed in the virtual networks list and the Topology tab is
displayed.
4 From the WM-AD Mode drop-down list, click Routed.
5 From the DHCP drop-down list, click one of the two options:
Local DHCP Server: If you select Local DHCP Server, the built-in DHCP server in Summit WM
●
Controller provides the IP addresses to the devices to the wireless network. For more
information, see "DHCP for WM-AD" on page
Gateway – The Summit WM Controller advertises this address to the wireless devices when
■
they sign on and get a dynamic IP address. The gateway corresponds to the IP address that is
communicated to mobile users
Mask – Subnet mask for this IP address to separate the network portion from the host portion
■
of the address (typically 255.255.255.0).
Address Range – Range from which the IP addresses are provided to the wireless devices that
■
would use this WM-AD. This text box (from and to) may populate automatically, if you have
already provided the range while configuring the APs.
B'cast Address – Populates automatically based on the Gateway IP address and the subnet
■
mask of the WM-AD.
Domain Name – External enterprise domain name. You must type the external enterprise
■
domain name in this text box.
Lease – text box has two sub text boxes – default, and maximum. The two sub text boxes
■
dictate the default and maximum time limits a wireless device can keep the DHCP server-
Summit WM Getting Started Guide, Software Version 5.1
16.
93