Dimensions; Torque Requirements - Exmark Lazer Z Air-cooled series Operator's Manual

2.9.6 Deck: Full floating deck is attached to out-front support frame. Six anti-scalp
rollers provide maximum turf protection. Deck design allows for bagging, mulching
or side discharge.
Deck Depth: 60" Deck: 6.0" (15.2 cm)
2.9.7 Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1" (2.5 cm) to 5" (10.2 cm.) in 1/4"(.64 cm) increments. The
cutting height adjustment handle has a transport position and all adjustments
can be made while the operator remains seated. Units also have a foot
operated deck lift assist lever to aid in raising the deck.
2.9.8 Mulching Kit: Optional.

2.10 DIMENSIONS

2.10.1 Overall Width:
w/60" Deck
w/66" Deck
w/72" Deck
2.10.2 Overall Length:
Roll Bar - Up
Roll Bar - Down
2.10.3 Overall Height:
2.10.4 Tread Width: (center to center of tires, widthwise)
Drive wheels
Caster wheels
2.10.5 Wheel Base: (center of caster tire to center of drive tire)
2.10.6 Curb Weight:
23, 27, & 30 HP Kohler units 1360 lbs. (617 kg)
28 HP Kohler EFI units

2.11 TORQUE REQUIREMENTS

Bolt Location
Blade Drive Sheave Mounting Nut ...............................90-110 ft-lbs. (122-149 N-m)
Cutter Housing Spindle Nut ......................................160-185 ft-lbs. (217-251 N-m)
Blade Mounting Bolt (lubricate with anti-seize)...................55-60 ft-lbs. (75-81 N-m)
Engine Deck/Front Frame Mount Bolts ..............................30-35 ft-lbs. (41-47 N-m)
Anti-Scalp Roller (See Figure 7)
Nyloc Nut ..................................................................30-35 ft-lbs. (41-47 N-m)
Hex Capscrew...........................................................50-55 ft-lbs. (68-75 N-m)
Engine Mounting Bolts ......................................................30-35 ft-lbs. (41-47 N-m)
Wheel Lug Nuts .............................................................90-95 ft-lbs. (122-129 N-m)
Wheel Motor Mounting Bolts............................................72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut ..............................................minimum125 ft-lbs. (169 N-m)
Rollover Protection System (Roll Bar) Mounting Bolts .......30-35 ft-lbs. (41-47 N-m)
Clutch Retaining Bolt (secured with threadlocker)..............55-60 ft-lbs. (75-81 N-m)
66" Deck: 6.0" (15.2 cm)
72" Deck: 6.0" (15.2 cm)
without deck
53.5 in. (135.9 cm)
57.3 in. (145.5 cm)
61.5 in. (156.2 cm)
w/60" Deck
81.9 in. (208.0 cm)
92.6 in. (235.2 cm)
Roll Bar - Up
71.9 in. (182.6 cm)
w/60" Deck
41.9 in. (106.4 cm)
37.3 in. (94.8 cm)
w/60" Decks
53.7 in. (136.4 cm)
w/60" Deck
1380 lbs. (626 kg)
- 14 -
deflector up deflector down
61.4 in. (155.8 cm) 72.8 in. (184.9 cm)
68.0 in. (172.7 cm) 79.4 in. (201.7 cm)
74.3 in. (188.7 cm) 85.8 in. (217.9 cm)
w/66" Deck w/72" Deck
83.7 in. (212.6 cm) 85.8 in. (212.6 cm)
94.4 in. (239.8 cm) 96.4 in. (244.9 cm)
Roll Bar - Down
53.8 in. (136.7 cm)
w/66" Deck w/72" Deck
45.9 in. (116.6 cm) 45.9 in. (116.6 cm)
42.3 in. (107.4 cm) 47.3 in. (120.1 cm)
w/66" Deck w/72" Deck
55.3 in. (138.4 cm) 59.1 in. (154.7 cm)
w/66" Deck w/72" Deck
1430 lbs. (649 kg) 1530 lbs. (694 kg)
1430 lbs. (649 kg) 1530 lbs. (694 kg)
Torque