Tecumseh Snow King LH195SP Operator's Manual page 22

II. Oil Fill Cap/Plug
If your engine does NOT have an oil fill cap/dipstick, go to
step 1. tf your engine has an oil fill cap/dipstick, see "1. Oil
Fill Cap/Dipstick" instructions on page 18.
,1,÷
Carefully disconnect spark plug wire and keep it away
from spark plug. See Figures 44 and 45. See "G. Avoid
Accidental Starts" instructions on page 2. Afterward,
continue reading instructions below.
• Keep the disconnected spark plug wire
securely away from metal parts where arcing
could occur.
• Carefully attach the spark plug wire to the
grounding post, if provided.
Figure 44. Disconnecting/Connecting Spark Plug
Figure 45. Typical Spark Plug Connection
2. Be sure fuel fill cap is on and tightened securely.
See Figure 46.
Figure 46. Fuel Fill Cap
.
Be sure you find the correct oil drain plug location (see
equipment manufacturer's instructions). See Figure 47.
4. Clean area around oil drain plug.
Angled Front View
1. Oil Fill Cap/Plug
2. Oil Drain Plug
Back View
Figure 47. Oil Fill/Drain Locations
Page 20 4-Cycle • Snow King Engine 181-1275-14