Sony Handycam HDR-CX350 Operating Manual page 65

Digital hd video camera recorder
Hide thumbs Also See for Handycam HDR-CX350:
Table of Contents

Advertisement

The r ecording
stops.
•The t emperature
of y our camcorder
is
extremely
high/lo_:
Turn off y our camcorder
and leave
itfor a while inacool/wann
place.
"PMB"cannot
be installed.
• Check the computer
environment
or
installation
procedure
required to install
"PMB" (p. 36).
"PMB" does not work
correctly.
• Quit "PMB" and restart your computer.
The camcorder
is not recognized
by the
computer.
• Disconnect
devices from the USB jack of the
computer
other than the keyboard,
mouse,
and your camcorder.
• Disconnect
the USB cable from the computer
and your camcorder,
and restart the computer,
then connect the computer
and your
camcorder
again in an orderly manner.
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your SoW dealer or local authorized
SoW
service facility. In this case, when you
contact them, giw, them all the numbers of
the error code beginning with C or E.
C:04:1_1_
• The battery pack is not an "IntbLITHIUM"
battery pack V series. Use an "IntbLITHIUM"
battery pack (V series) (p. 15).
• Connect the DC plug of the AC Adaptor to
your camcorder
securely (p. 15).
C:06:1_1_
• The battery pack temperature
is high. Change
the battery pack or place it in a cool place.
C: 13:[Z] [Z]/ C:32:[ZJ[Z]
• Remove the power source. Reconnect
it and
operate your camcorder
again.
E:I_I_:1_1_
• Follow the steps ti'om @ to @ on page 64.
O
• The internal hard disk of your camcorder
is
fl_fll.Delete unnecessary
images on the internal
hard disk (p. 34).
• An error may have occurred with the internal
hard disk of your camcorder.
• Battery power is lox_:
• The battery pack temperature
is high. Change
the battery pack or place it in a cool place.
[l.l
• The temperature
of your camcorder
is getting
high. Turn offyour camcorder
and leave it in
a cool place.
• The temperature
of your camcorder
is logan
Make the camcorder
warm.
• No memory card is inserted (p. 21).
• When the indicator
flashes, there is not
enough free space for recording images. Delete
unnecessary
images (p. 34), or tbrmat the
memory card after storing the images on other
media.
g
_5

Advertisement

Table of Contents
loading

Table of Contents