Press Menu - Sony Trinitron KV-27S10 Operating Instructions Manual
Hide thumbs
Also See for Trinitron KV-27S10:
- Service manual (71 pages) ,
- Operating instructions manual (27 pages) ,
- Supplementary manual (1 page)
Advertisement
6
To erase and/or add other channels,
repeat
step 5.
7
When you finish,
press MENU.
MENU
Note
• If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice
versa.
Setting
cable
TV on or off
If you have connected
the TV to a cable TV system, set
CABLE to ON, the factory setting. If not, set CABLE to
OFF.
You do not have to do this procedure if you execute
AUTO SET UP (page 9). Do this procedure only when
you want to set it manually.
1
Press MENU.
2
Press A+ or V- to move
the cursor
(1_) to SET
UP and
press
RETURN.
3
4
Press A+ or V- to move the cursor (I_)
to CH SET UP and press RETURN.
I_UH SET
UP
CABLE
: ON
AUTO
PROGRAM
CH ERASE/ADD
_MENU
se
# _i_
Exit
Set CABLE to ON or OFF:
(1) Make sure the cursor (1_) is beside CABLE and
press RETURN.
If the cursor is not beside CABLE, press _+ or
V- to move the cursor and press RETURN.
(2) Press A+ or V- to select ON or OFF and,
(3) press RETURN.
ll SET UP
CABLE : OFF
AUTO PROGRAM
CH ERASE/ADD
::)MENU
se¢_Exit_
5
Press MENU
to =eturn
to the uriginal
screen.
Note
• If CH SET UP menu appears in black, the TV is set to a video
input and you cannot select CABLE. Press TV/VIDEO so that a
channel number appears.
Presetting
channels
You can preset TV channels
easily by using the AUTO
PROGRAM feature.
You do not have to do this procedure
if you execute
AUTO SET UP (page 9). Do this produre only when
you want to set it manually.
1
Press MENU.
2
Press _+ or V- to move the cursor (,)
to SET UP and press RETURN.
3
Press A+ or V- to move the cursor (1_)
to CH SET UP and press RETURN.
CH SET
UP
bCABLE
: ON
AUTO
PROGRAM
CH ERASE / ADD
:)MENU
Use
_ [_
Exit
4
Press A+ or V- to move the cursor (1_)
to AUTO PROGRAM and press RETURN.
AUTO PROGRAM
"AUTO PROGRAM"
appears
on the screen and the
TV starts scanning and presetting
channels
automatically.
When all the receivable
channels
are
stored, "AUTO PROGRAM"
disappears
and the
lowest numbered
channel is displayed.
5
Press MENU
to return
to the original
screen.
Note
• If the CH SET UP menu appears in black, the TV is set to a
video input and you cannot select AUTO PROGRAM. Press
TV/VIDEO or TV so that a channel number appears.
Getting
Started
I
1 1
Advertisement
