Sony Handycam HDR-CX360V Operating Manual page 54

(_]]ow)
A/V Remote Connector
AB/R
Input
s VIDEO
@
VIDEO
®4 --_
(_Mlow) t
(White)
AUI)I()
(Red)
Connectyour camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable [] (supplied) or an A/V
connecting cable with SVlDEO
[] (sold separately).
• Connect your camcorder to the input jacks
of the recording device.
Start playback on your
camcorder, and record it on the
recording device.
• Refbr to the instruction manuals supplied
with your recording device tbr details.
When dubbing is finished, stop
the recording device, and then
your camcorder.
_<:,_ Signal flow
[] AN connecting cable (supplied)
[] AN connecting cable with S VIDEO
(sold separately)
By using this cable, higher quality
images can be produced than with an
A/V connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDE()
cable. If you connect the S VIDE() plug
only, you will hear no sound. The yellow
plug (video) connection is not necessar?c
Insertthe recording media in the
recording device.
• If your recording device has an input
selector, set it to the input mode.
(_ Notes
• Since copying is performed via analog data
transff'r, the image quality may deteriorate.
• _\m cannot copy images to recorders connected
with an HDMI cable.
• To copy date/time infbrmation, camera data,
and coordinates (HDP, CX360V/PJ30V), touch
(MENU) --_ [Setup] _ [['_-"] ( Playback
Settings)] _ [Data Code]
a desired setting _ II'_l.
• When the screen size of display devices (TV,
etc.) is 4:3, touch _ (MENU) _ [Setup]
[_ (Connection)] _ [TV Type] _ [4:31
• When you connect a monaural device, connect
the yellow plug of the A/V connecting cable
to the video input jack, and the white (lef}
channel) or the red (right channel) plug to the
audio input jack on the device.