Vcr; Connecting A Dbs Receiver; Connecting A Dbs Receiver And A Vcr - Sony Trinitron KV-29RS26C Operating Instructions Manual

iil
!
...... L.....
Connecting and Installing the TV (continued)
Connecting a DBS (Direct Broadcast
Satellite) receiver _
1 Connect the cable from your satellite antenna
to your DBS receiver.
2 Attach the coaxial connector from your cable or
antenna to VHF/UHF on your TV.
3 Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your DBS receiver
to AUDIO and VIDEO IN on your TV. --
Connecting a DBS (Direct Broadcast
Satellite) receiver and a VCR
1 Connect the cable from your satellite antenna
to your DBS receiver.
2 Attach the coaxial connector from your cable or
antenna to VHF/UHF-IN on your VCR.
3 Using a coaxial connector, connect VHF/UHF-
OUT on your VCR to VHF/UHF on your TV.
4 Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your DBS receiver to
AUDIO and VIDEO IN on your VCR. .
5 Using AUDIO/VIDEO connectors, connect _
AUDIO and VIDEO OUT on your VCR to !
AUDI_) and VIDEO IN on your TV. i
'!
Note:
• To vie_v input from the DBS or VCR, select VIDEO 1
by pressing TV/VIDEO on the remote control.
6
Disconnect all power sources before making any connections.
For the highest picture quality, use $ VIDEO
instead of the yellow A UDIO/VIDEO cable. See
your DB$ manual for more information.
DBS receiver
Satellite/ I _ _ (_ (_1
antenna I u_°_t T T T _'1
cable
(Rearof TV)
L
"_------_AUDIO-R (red)
V _ AUDIO-L (white)
_ VIDEO,(yellow)
!
VMC-810S/820S (not supplied)
VMC-810S/820S (not supplied)
DBS receiver
VCR _ , 2 I
VIDEO (yellow) _
AUDIO-L (white)
3
AUDIO-R (red)
5
(Rearof TV)
L L
!
VMC-810S/820S (not supplied)