Direct Play - Sony Trinitron KV-32XBR36 Manual

Follow these instructions to switch from TV to VCR mode by
simply pressing the I_ (playback) button on the supplied
Remote Commander.
Press AN WINDOW +/- until the cursor points to "DIRECT PLAY."
Exarnple: Connect your VCR to the VIDEO IN 1 jacks, and
set the VTR1-2-3 MDP selector to VTR2. When
you press I_, the input mode changes to the
VCR connected to the VIDEO IN 1 jacks.
After completing the steps below, the VTR selector position is
retained in the TV's memory.
Remote Commander (with video control cover open)
A/V WINDOW VOL OH
MENU
RETURN PICTURE
F='!
r_v_
VTR1-2-3 MDP TV CABLE BOX
TVNTR CODE SET STANDARD
EZI 0
Press MENU. The main menu appears.
Press AN WINDOW +/- until the cursor points to
"SET UP."
Press RETURN.
The set up menu appears.
Press RETURN. A messagescreen appears.
Note
This screen reminds you to
set the manufacturer's code, if you
have not already done so (pp. 66 - 67).
_I-DIRECT,PLAY: ! .
Prograll:youl _ rem0te
wtLh-PRESET CODE before
u_tng DIRECTPLAY
feature.
si_cT¢ _rruN _lil_
Press RETURN again. The DIRECT PLAY screen appears.
-_RECT PLAY
I,VIDE01: VTR I
VIDE02: OFF
VIDE03: OFF
VT_P
Press AN WINDOW +/- until th,_ = cursor points to the
video input mode. (When the vicleo equipment is
connected to VIDEO IN 1, select "VIDEO17)
Press RETURN. The mode display turns red.
(Continued)
_D
0
0
Chapter 3: Using Advanced Features
69