Connecting Vcr; Connecting; Connecting To An S Video Equipped Vcr - Sony Trinitron KV-37XBR48M Operating Instructions Manual

J_
"9
,7
_m Connecting and Installing the TV (continued)
Connecting an antenna/cable TV
system with a VCR
1
Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2 Using AUDIO/VIDEO connectors, connect
AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV
(Yellow-VIDEO, White-AUDIO Left, Red-
AUDIO Right).
3 Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on your TV.
Connecting to an S Video equipped
VCR
Disconnect all power sources before making any connections.
Coaxial cable
3
VCR
(Rear of TV)
ff woc_3
Cable I_ °"T
1 ,,,-..,.-=¢..f._ , .
CONinT{B
...............
OUT (Q/
AUDIO-L (white)
VIDEO (yellow)
!
2 VMC-810S/820S (not supplied)
1 Attach
the coaxial connector from your
cable or antenna to IN on your VCR.
2 Using AUDIO connectors, connect AUDIO
OUT on your VCR to AUDIO IN on your TV
(White-AUDIO Left, Red-AUDIO Right).
3 Using a coaxial connector, connect OUT on
,yu_l
v_,-l\
t',_ vla, l / ,,_.,1_1 ,JJl ),_pul •
v.
4
Using an S VIDEO connector, connect
S VIDEO on your VCR to S VIDEO on
your TV.
Note:
• if you are connecting a monaural VCR,
connect only the single audio output to the
left (MONO) input on your TV.
3
(Rear of TV)
TO " _ V
Coaxial cable ,,_o
VCR _ I_
AUO_OR A UOK_t_vEo s vloEo
U ,v,o o
YC-15V/30V AUDIO-R (red)
4 (not supplied) AUDIO-L (white)
2 T
RK-74A (not supplied)
4