Using The Channel Set Up Menu - Sony Trinitron KV-32V42 Operating Instructions Manual

Using the CHANNEL SET UP
menu
CHANNEL SET UP
_CABLE: ON
CHANNEL FIX: OFF
AUTO PROGRAM
CHANNEL SKIP/ADD
CHANNEL CAPTION
_MENU
Move_ Select(_ Exit_
To select the CHANNEL SET UP
menu:
Display tomb Highlight _]_
Select
8
Note
Your remote control can be programmed to
operate your cable box. (see page 30)
CABLE ON: Select if you are receiving cable channels with a CATV cable.
OFF: Select if you are using an antenna.
You will need to run AUTO PROGRAM after changing your CABLE settings.
CHANNEL FIX
Useful when you
have a cable box or
satellite receiver
connected
AUTO PROGRAM
CHANNEL
SKIP_DD
CHANNEL
CAPTION
Labe/ up to 12
channels with their
ca//letters
2-6: Select when you want to control all channel selection through a cable box.
Select the appropriate channel number (usually 3 or 4) and use the cable box's
remote control for selection.
AUX 2-6: Select when a cable box is connected to the AUX input, (see page 4).
Press the ANT button to alternate between inputs. (KV-32S66, 35S66 only)
VIDEO 1: Select from available video inputs when you have video equipment
connected (e.g. satellite receiver) and you want your TV fixed to it.
Instructs the TV to program all receivable channels.
With the CHANNEL SKIP/ADD window open:
1 Select the desired channel.
2 Press _ to SKIP or ADD (only one option will be
available).
CHANNEL SKiP/ADD
33
SKIP
ADD
_MENU
Use [0-s] or [CH +/-]
to select the channel
Move_(_ Select(_ Exit_
With the CHANNEL CAPTION menu open:
1 Press _ and then 4, or t. to access the desired
channel, and press _ again.
2 Press ,IFor ,_ to display the first letter or number
of the caption and press _ to select it.
3 Press _ to activate.
CHANNEL CAPTION
CHANNEL 33
CAPTION ....
_MENU
Move_ Select(_ Exit_
23