Sony Trinitron KV-27S42 Operating Instructions Manual page 28

CHANNEL SET UP menu
CHANNEL SET UP
CABLE: OFF
CHANNI_L FIX: OFF
AUTO PROGRAM
CHANNEL SKIP/ADD
CHANNEL CAPTION
DMENU
Move _(_ Select _ Exit_
CABLE ON: Select if you are receiving
cable channels with a CATV
cable.
OFF: Select if you are using an antenna.
CHANNEL FIX
2-6: Select when you want to control all channel selection
through a cable box.
AUX: When a cable box is connected to AUX and a
cable/antenna is connected to VHF/UHF, (KV-27S66,
27V66 only).
VIDEO: Select from available video inputs when you have
connected video equipment, (e.g. satellite receiver) and
you want your TV fixed to it.
AUTO
PROGRAM
Run AUTO PROGRAM whenever setting up your TV. It
will cycle through all available channels and program any
receivable channels.
CHANNEL
SKIP/ADD
Use this feature after you run AUTO PROGRAM to skip
unwanted channels or add new ones.
1 Use the _"or (_ buttons to access the desired channel.
2 Press (_3 to SKIP or ADD, (only one option will be
available).
CHANNEL
CAPTION
Label up to 12
channels with
their call letters
With the CHANNEL
CAPTION window open:
1 Press (23, then press o or _ until you reach the desLred
channel number.
2 Press (3D to activate the channel.
3 Press _" or _, to display the first call letter or number of
the caption and press (39 to select it.
24