How To Use P&P And Pip Features; To Display A Picture In The Sub Window; To Change Channels In The Sub Window; To Exit From P&P And Pip - Sony BRAVIA KDL-46S3000 Operating Instructions Manual

How to Use P&P and PIP Features
This TV comes with the P&P and PiP features
which allow you to view two pictures
simultaneously. P&P (picture and picture)
provides two windows side by side. PiP (picture in
picture) provides PC input signal and TV
channels.
• The VHF/UHF/CABLE input must be connected to
use the P&P/PIP feature.
• These features are not available when the Parental
Lock settings are set to block programs by ratings. If
channel blocking is set, these features can still be used.
• Closed Captions (CC) is not available in these
features.
P&P
Main Window o Window
PIP
Main Window o
(PC)
Sub Window
(Location of
the Sub
can
be moved by
pressing
t'/4/*/*.)
1
While watching one of the following inputs:
Component,
HDM[ or
PC;
press
OPTIONS
to display the OPTIONS menu.
• The input you are watching will become tile Main
Window.
2 Press 414 to highlight the P&P or PiP and
press @ to display the TV channels in the
Sub Window.
• To swap audio in P&P mode, use the 14. button to
swap the highlight between the Main Window and Sub
Window.
• To swap audio in PiP mode, press
OPTIONS,
then
press tl./4 to highlight Audio Swap.
Press CH +/- to change the channels or enter the
channel number using the 0-9 numeric buttons.
1
2
Press the OPTIONS.
Press @ while Exit P&P or Exit PiP
(depends on the mode your are in) is "_
lfiglfligbted.
o.
• You may also press RETURN while in this feature to
exit.
• Additional compatible device with television tuner
required to watch two sinmltaneous live television
programs.
Component 1
Component 2 TV Channel
(VHF/UHF/
HDMI IN 1 (except PC timing) CABLE IN)
HDMI IN 2 (except PC timing)
PC TV Channel
HDMI IN 1 (PC timing) (VHF/UHF/
HDMI IN 2 (PC timing) CABLE IN)
• Compatible PC Timings can be t_und on page 18.
27