Operating Video Equipment - Sony KP-46V25 Operating Instructions Manual

MDPmanufacturer code numbers
Manufacturer Code number
SONY 04
KENWOOD 58
MAGNAVOX 52
MARANZ 54
MITSUBISHI 51
PANASONIC 55
PHILIPS 52
PIONEER 51
RCA 51
SANYO 57
SHARP 56
YAMAHA 53
Notes
• If more than one code number is listed, try entering them one
by one, until you come to the correct code for your equipment.
• In some rare cases, you may not be able to operate your non-
Sony video equipment with this remote commander. This is
because your equipment may use a code that is not provided
with this remote commander. In this case, please use the
equipment's own remote control unit.
• The code numbers for Sony equipment are assigned at the
factory as follows:
Beta, ED Beta VCRs 01
8 mm VCR 02
VHS VCR 03
MDP 04
Caution
When you remove a battery from the remote commander, the
code may revert to the factorypreset. Reset the codes each time
you replace the battery,if necessary.
34-EN [ Operations
Operating video equipment
VTR m
Middleposition---H
c_O_OC_O
cz_OC_O
c:_ cD _
POWER
Video operating
buttons
Set the selector VTR 1-2-3 according to the
Video equipment you want tO operate.
(Rear of the
remote
commander)
Use the video operating buttons on the remote
commander to operate the video equipment.
Operating a VCR Buttons on the remote
commander
To turn on or off Press POWER
To change channels Press CH +/- '
To record Press • and REC
simultaneously
To play Press _"
To stop Press •
To fast forward Press
To rewind the tape Press
To pause Press ||
To search the picture Press _ or "(_ during
forward and backward playback
Operating a laser-disc Buttons on the remote
player commander
To play Press
To stop Press •
To pause Press I!
To resume normal playback,
press again.
To search the picture Keep pressing _ or
forward and backward during playback
To resume normal playback,
release the button.
To search the chapter Press CH +/-
forward and backward
Note
• If the video equipment does not have a certain function, the
corresponding button on this remote commander will not
operate.