Sony Cyber-shot DSC-TX7 Instruction Manual page 5

Note:
This equipment has been tested and l\mnd to comply with the limits |t)l- a (]ass B digital
device, pursuant to Part 15 of the F(-( Rules.
These limits arc designed to provide reasonable protection against harmful interlZ.rence in
a residential installation. This equipment generates, uses. and carl radiate radio frequency
energy and. if not installed and used in accordance with tile instructions, may cause
harmful interlk.rence to radio communications. However. there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be detel-lnined by turning the
equipment off and on. the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different lbom that to which tile
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The supplied interlace cable must be used with the equipment in order to comply with tile
limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony (orporation. 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelfinger Strasse 61.7(1327 Stuttgart, Gernlany. For any service or
guarantee matters please mfcr to the addresses given in separate service or guarantee
doculnents.
This product has been tested and found compliant with the limits set out in the EMC
Directive for using connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic fields at tile specific lYequencies may influence tile picture and sound
of this unit.
Notice
If static electricity or electromagnetism causes duta transl\.r to discontinue midway (fail),
restart the application or disconnect and connect the communication cable (USB. etc.)
again.
5GB