Setting The Sleep Timer - Sony Trinitron KV-13M31 Operating Instructions Manual

Displaying Un-Scr_:_:n Intormdtlon
I I •,
Use the DISPLAY key to check the TV's Display settings.
1 Press DISPLAY. DISPLAY
The channel number will be
displayed. The TV will also display
©
the MTS mode if SAP, MAIN, or
MONO are selected (KV-20S20,
20S21, 20S30, 20V60, 21RS20,
21RS20C, 21RS30C, 21SD1 only).
The MTS mode display disappears
after 4 seconds.
XDS ON will appear on the screen. If XDS _
(Extended Data Service) is broadcasting,
information will then appear on the screen _o_ r,_ _.
(except KV-13M20, 14PM1, 14R20, 14R20C, ,_m w_ s_
14RD1)
3 Press DISPLAY again.
CC1 ON (if selected) will appear on the screen for a few seconds.
Captions will then appear at the top or bottom of the screen.
4 To turn off Caption Vision or XDS display, press DISPLAY again
until DISPLAY OFF appears.
Note
• See page 13 for more information about Caption Vision.
Watching Video Tapes
Press TV/VIDEO until the
correct video input appears.
TV/VIDEO
2 Press PLAY on your VCR to view the video tape.
3 Press TV/VIDEO to return to the TV program.
I
Setting the Sleep Timer
[I IlII
The sleep timer allows tile TV to stay on for a length of time and then
shut off automatically.
1 Press SLEEPuntil the time you
want appears.
Each time you press SLEEP, the
display moves between 30, 60, 90,
and OFF.
SLEEP appears one minute before
the TV shuts off.
SLEEP [ (_ SLEEP 30
To cancel the sleep timer, press SLEEPagain until SLEEPOFF
appears, or turn off the TV.