Viewing 3D Images; Image Viewing - Sharp AQUOS LC-70LE735U Operation Manual

Enjoying 3D image Viewing
You can make various settings to enhance 3D image viewing.
Example
APPS
1
2
3
4
5
Press MENU to display the MENU screen, and then
press _/_ to select "System Options".
Press A/T to select "3D Setup", and then press
ENTER.
Press A/V to select a specific item, and then press
ENTER.
Press A/T (or 4t/),,) to select the desired setting,
and then press ENTER.
Press MENU to exit.
This setting can be used to switch to 3D mode
automatically when a 3D identification signal is
detected.
Yes: When a 3D signal is detected, 3D mode is selected
automatically.
No: Auto change is not performed.
Select the method for adjusting the 3D still image
effect (depth).
Auto: Adjuststhe still imageeffect (depth)automatically.
Manual: Manuallyadjust the still image effect (depth).
If you selected "Manual", adjust the 3D still image effect
(depth) with "3D Still Image Effect Adjustment".
This function can be adjusted when viewing 3D still images
in USB mode.
Even if you selected "Auto", the 3D still image effect (depth)
may not be correctly adjusted depending on the 3D still
image.
3D still images taken in macro mode will be displayed with
excessive depth.
If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
You can adjust the 3D still image effect (depth).
Adjust the level from -5 to +10. "0" is the level where
no adjustment is made (factory preset value).
This function can be adjusted when viewing 3D still images
in USB mode.
If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
This displays the elapsed time of 3D image viewing.
Yes: Displays the elapsed viewing time on the screen
every hour.
No: Does not display the elapsed viewing time.
3D signal may not be detected depending on the signal
format.
You can adjust the 3D effect when converting images
from 2D mode to 3D mode.
Select a desired level of convert effect from +1 to +16.
This displays 3D images for testing the 3D operation.
Clicking "Start" on the screen plays back 3D test
images.
If you press RETURN during playback, the previous
screen will be displayed.
This function is only available when converting 2D images
to 3D images.
When you use this function, image conversion on the TV
will result in some differences in the original images and
how they appear.
2D images that have been converted to 3D images may be
viewed only for personal use.
To enable this function, set "TV Location" to "Store".
Selecting "Yes" prevents the 3D Glasses from receiving
3D signals from other TVs.
Q- 44