Table of Contents
Advertisement
QUICK REFERENCE
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert two "AA" size batteries
(supplied with the product).
3 Close the battery
cover.
,, Place the batteries with their terminals
corresponding to the (+) and (-)
indications in the battery compartment.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
,, Do not mix batteries of different types. Different types of batteries have different characteristics.
,, Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
,, Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
,, The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
,, If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Remote control
30°
sensor
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the TV.
If the POWER
indicator
on the television
still does not light up, press POWER
on the remote control
to turn the
power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
_=8
Advertisement
Table of Contents
