Table of Contents
Advertisement
SPECIAL
FEATURES
]
Setting
Up Your
Remote
Control
to Operate
Your
Cable
Box
",11The remote control has four
"inodes": "TV," "VCR," "CABLE"
Press the MODEbuttonto select CATV, ( CMVmode is displayed on
and "DVD."
LEDscreen).
Press the "MODE" button to switch
the relnote control to the "Cable"
n-lode.
On your Samsung remote control, press SET.
-'4
Make sure you enter 3 digits of
4.
the code, even if the first digit is a
Enter 3 digits of the cable box code listed bel0w i:0rYourbrand of
"0." (If more than one code listed,
cable box.
try tile first one.)
s
" f>nr c ab,e box does,lot
turn
Oil, repeat steps 2, 3, and 4, but try
Press POW[R.Y0urcable box should turn on. Ify0ur cable box turns
one of the other codes listed for your
on;your remote control is now'_set up" correctly,
particular brand of cable box. (If no
other codes are listed, try each cable
box code, 000 through 077.)
When your reinote control is
hi the "CABLE" mode, tim volume
Once your remote control is set up, press the MODE button any time
buttons still control your TV's vol-
you want to usetheremotetooperate
yourcab!e box:
nine. Also, the VCR control buttons
(PLAY,PAUSE, etc.) will still operate
your VCR.
81
Advertisement
Table of Contents
