Samsung TXM3096WHF Owner's Instructions Manual page 12

Your NEw TV ]
Remote Control
You can use the remote control up to about 23 feet from the T_/[ When using the remote,
always point it dh-ectly at the T#
You can also use your remote control to operate your VCR and cable box. See page 4.1
for details.
O POWER
[urns the TV on and off,
O Number buttons
Press to select channels directly
on the TV.
+100
Press to select channels over 100.
For example, to select
channel 121,press" +100/' then
press" 2" and" I,"
O
DISPLAY
Press to see the time, channel,
etc., on-screen. Also press to exit
(quit) the menu system.
O P.SIZE
Press to change the screen size,
Your choices are Normal, Zoom1,
Zoom2 or Wide screen.
O RESET
If your remote control is not func
tioning properly, take out the bat
teries and press the reset button
for about 2-3 seconds. Rednsert
the batteries and try using the
remote control again,
O MTS (Multichannel
Television Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
ADD/ERASE
Press to add or erase channels in
the TV's memory.
O TV/COMPONENT
Press to switch tile TV or COMPO
NENT1, 2 mode,
O CHA and CHI"
(Channel Up/Down)
Press CHA or CHV to change
channels(Also used to highlight
selections on the on screen
menus).
@ MUTE
Press to temporarily cut off
the sound,
O MODE
Selects a target device to be con
trolled by the Samsung remote
control (i.e., TV,VCR,Cable box, or
DVD),
O
SET
Use this button when you are set
ting up your remote control to
operate your VCR,Cable box, or
DVD),
_) P.MODE
Adjust tile TV picture by selecting
one of the preset factory settings
(or select your personal, cus
tomized picture settings).
TXM2797HF / TXM3297HF/ TXM3097WHF
TXM2796HF/ TXM3296HF/TXM3096WHF
O S.MODE
Adjust tile TV sound by selecting
one of the preset factory settings
(or select your personal, cus
tomized sound settings),
_) PRE-CH
runes to the previous channel.
_) R.SURF
Press the R.SURFbutton to auto
matically return to a preferred
channel after a user preset time
delay.
0
TV/VIDEO
Press to display all of the
avai{able video sources (Le., AV1,
AV2, AV3, S VIDEO).
VOL -, VOL +
Press to increase or decrease the
volume(Also used to make selec
tions on the on screen menus).
_) MENU
Displays the main on screen
menu,
O STILL(Main)
Press to stop the action during a
particular scene. Press again to
resume normal video.
Note: The still function doesn't
operate in Component1,2 mode.