Wireless Network Setup
The menu is activated only if the Samsung
Infolink Wireless
adapter is connected.
(See page 107)
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)
Settings are automatically
configured.
The wireless
IP sharer to be connected to this product must support DHCP.
1.
Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _
button.
2.
Press the A or T button to select "Wireless Network Setup", then press the
ENTER
C_ button.
m
4.
Press the ENTER _
button to select "lnternet Protocol Setup".
Press the A or T button to select "Auto Setup", then press the ENTER C_,
button.
The Intemet Protocol is set automatically.
Select "Access Point Select" to check the network connectivity.
(Refer to page 111 )
Press the EXIT button to exit.
Manual Setup
1.
Press the MENU button to display the menu.
Press the A or T button to select "Setup", then press the ENTER _
button.
2.
Press the A or T button to select "Wireless Network Setup", then press the
ENTER _
button.
3.
Press the ENTER 1::3_ button to select "lnternet Protocol Setup".
4.
Press the A or T button to select "Manual Setup", then press the ENTER
button.
_m
Press the A, T, 4 or I_ button to move to an item, and press the numeric
button to configure the selected item. Press the ENTER C_ button.
If you want to use a static IP address, refer to the user manual of your
wireless
IP sharer.
Select "Access Point Select" to check the network connectivity.
(Refer to
page 111)
Press the EXIT button to exit.