Table of Contents
Advertisement
The basic input/output functionality is the same, but using Sensaura 3D can accelerate
DirectSound 2D, Direct Sound 3D, API, A3D 1.0, EAX 1.0, EAX 2.0, MacroFX, EnvironmentFX, or
MultiDrive. Additionally, you are able to experience 3D positional audio in applications which
support it.
[Q] Does the NEC USB controller can cause problems?
Yes, some PCs which are equipped with the NEC USB controller can suffer from noise or pops
because of buffering of the sound streams. If you experience this issue, go to 'Control panel ->
System -> Hardware -> Device Manager -> Universal Serial Bus controllers' to check if you have
a NEC controller.
Here are some tips to solve the problem.
1. If you have a NEC USB controller, switch your computer to 'Standard PC' mode.
2. If the EX5 is hooked to a USB Hub, please connect it directly to the root USB port.
[Q] Is it possible to use two sound cards (On-board card and USB sound card) in one PC?
Yes, but you have to select which one is to be used by default. Go to 'Control panel -> system -
> Sounds and Audio Devices Properties -> Audio -> Select 'USB Audio' in Sound playback.
* A conflict may occur between the PCI card and the USB Audio device. If you experience
problems, try removing the PCI card (or disabling onboard sound) to check if that's the problem.
AUDIOTRAK MAYA EX5 User's Guide
- 20 -
Advertisement
Table of Contents
