Cakewalk - Audiotrak INCA88 Manual

INCA88

3. CAKEWALK

When you launch Cakewalk for the first time after installing the INCA88, Cakewalk will
automatically start 'Wave Profiler' to set a buffer size. In Cakewalk, select 'Audio...' from
'Options.' Check to see if the 'INCA88' is selected as 'Input Drivers' and 'Output Drivers' under
'Drivers' tab. Also check to see that the 'INCA88 Audio Driver' is selected as 'Timing Master'
under the 'General' tab.
<Picture 6-5 > Cakewalk Setup 1
62