Installing The Prodigy 7.1/5.1 Lt Pci Card - Audiotrak Prodigy 7.1 LT Manual

PRODIGY 7.1/5.1 LT
2. Installing Prodigy 7.1/5.1 LT PCI card
1) Look for an empty PCI slot. If you do not know which one is a PCI slot,
please read the following:
2) The PCI slot is the most common and is used for a wide range of
devices from the soundcard to the modem. Usually, the PCI slot is the
white-colored slot. It should not be too hard to find the PCI slot for
Prodigy 7.1/5.1 LT.
3) If there is a guide blocking the empty slot, please remove the guide
using the proper screwdriver.
4) Put the Prodigy 7.1/5.1 LT PCI card into the slot and make sure it is
placed in the slot correctly. Insert the card into the slot and then tighten
the screw. Close the case.
5) Connect G9 cable to the G9 connector of Prodigy 7.1/5.1 LT.
- 8 - 8