Ematic eGlide Pro 2 Manual page 44

The "Found New Hardware Wizard" window will pop up on the
bottom right corner as shown below. Choose "Install from a list or
specific location (Advanced)", and then click "Next" to install the USB
driver, see the picture below:
NOTE: The USB port of the PC must be USB2.0, or it cannot be
used to update the device.
Select "Include this location in the search", and navigate to the
following folder "Update Software File" > "291xDriver" > "x86" > "XP"
on the CD ROM, then click "OK". The system will detect and install
the driver automatically, finally click "Finish", see the pictures as
below:
Click "Continue Anyway".
44