Advanced Wireless Settings - D-Link DIR 601 - Dlink Wireless N 150 Home Router Product Manual

Secton  - Configuraton
Transmit Power:
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value. 100 is
the default setting and is recommended.
RTS Threshold:
This value should remain at its default setting of 2432.
If inconsistent data flow is a problem, only a minor
modification should be made.
Fragmentation
The fragmentation threshold, which is specified in bytes,
Threshold:
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented
before transmission. 2346 is the default setting.
DTIM Interval:
(Delivery Traffic Indication Message) 3 is the default
setting. A DTIM is a countdown informing clients of the
next window for listening to broadcast and multicast
messages.
WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in
countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Enable:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless
clients.
Short GI:
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may
create higher data loss.
D-Lnk DIR-601 User Manual

Advanced Wireless Settings