Transfer Box; Adsl Settings - Ematic eGlide 2 Manual

Transfer Box

NOTE: You must use the transfer box to connect to a USB storage device (U-disk)
for accessing/storing your photos, music, video, or eBook files, to connect to an Ethernet
network, or to connect to a 3G wireless network card.
To connect to a USB device:
1 Insert a USB device (U-disk) into the transfer box.
2 Insert the transfer box into the 24-Pin interface on the tablet.
CAUTION: Don't insert and remove the U-disk repeatedly in a short time, as this
may cause damage to the U-disk.
To connect to an Ethernet cable:
1 Insert the transfer box into the 24-Pin interface on the tablet.
2 Insert the Ethernet cable into the Ethernet interface on the transfer box.
3 Observe the device has automatically accessed the network IP address as
indicated by the appearance of ETH in the status bar on the Desktop screen.
4 Tap the Ethernet icon

ADSL Settings

1 Tap the ADSL Settings application icon
2 Input a username and password.
3 Select Connect to access the broadband network.
to manually connect to an IP address.
.
Setup | 10