Transferring Media Between A Computer And The Device - Ematic eGlide Pro III User Manual

Transferring media between a computer and the device:

Use the File Explorer to copy files between an external storage device and the eGlide
Pro III.
NOTE: The pre-installed applications and the Android OS occupy a considerable
portion of the capacity. It is normal to see a difference between available memory
space and total capacity.
1 Connect the device to a computer with the supplied USB cable.
2 Allow the device to turn ON then tap USB CONNECTED to copy files to/from
your computer.
3 Observe the USB notification message showing a USB connection with your
computer and tap "Turn on USB storage".
4 Observe the two removable disk drivers shown on the computer's explorer: one
is the internal memory of the device and the other is the memory card inserted
into the device.
5 Copy files to/from these disk drivers just as you would the hard drive on your
computer.
Using the eGlide Pro III | 15