Trouble Checks - RCA F25674 User Manual

=
References,
Trouble Checks
Trouble
Remote
Buttons don't work when you
press them
Checks and Adjustments
Press TV to set the remote to control the TV. See buttons on page 6-7.
Works part or none of the
time
Can't select certain channel
Sound
Noisy stereo reception
Picture okay, no sound
Picture okay, sound poor
No stereo on stereo station
TV Turns on or off
Turns off by itself
Turns on by itself
Does not turn off at
Alarm Time
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying tO control.
Press TVso remote will control TV.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 2.
Press number buttons. Channel may not be in memory. See autoprogram
on page 20. -
Make sure TV/VCR switch on VCR is in the TV position.
For numbers over 100, press and hold I until 1- appears, then press the
other two numbers.
Set Cable/Air feature to Cable for channels higher than 69. See page 27.
Turn Stereo off. The stereo broadcast may not be clear. See page 18:
Press VOLUME + or MUTE to restore sound.
Make sure TV's speakers are on. Details are on page 19.
Try another channel.
Try adjusting the Tone. See page 18.
Change Stereo to Off. The stereo broadcast may not be clear. See page 18.
Make sure Stereo is turned on. See page 18.
Check Sleep Timer. See sleep timer on page 22.
Wait 30 seconds and turn. on again, a powersurge may have occured.
Check Alarm Off time. See alarm clock on page 23.
Check Alarm On Time. See alarm clock on page 23.
Check clock time. See Clockon page 3.
Make sure alarm is turned on or off. See alarm clock on page 23.
Check clock time. See clock on page 3. •
31