Electrical Connection - Electrolux EN3481AOX User Manual

8.4 Installation of the TasteGuard filter
8.5 Levelling

8.6 Electrical connection

Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be earthed. The pow-
er supply cable plug is provided with a
contact for this purpose. If the domestic
The TasteGuard filter is an active carbon
filter which absorbs bad odours and per-
mits to maintain the best flavour and aro-
ma for all foodstuffs without risk of odour
cross contamination.
On delivery the carbon filter is in a plastic
bag to maintain it's duration and charac-
teristics. The filter should be placed be-
hind the flap before the appliance is
turned on.
1. Open the flap cover.
2. Remove the filter from the plastic bag.
3. Insert the filter in the slot found in the
back of the flap cover.
4. Close the flap cover.
The filter should be handled care-
fully so fragments do not loosen
from the surface. The filter should
change once every six months.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
power supply socket is not earthed, con-
nect the appliance to a separate earth in
compliance with current regulations, con-
sulting a qualified electrician.
The manufacturer declines all responsibili-
ty if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
ENGLISH 21