Table of Contents
Advertisement
6 electrolux
DISPLAY
The display shows the following informa-
tion:
2.1:Temperature value
2.2: Temperature icons
During the washing cycle the display shows
the temperature icon animated to indicate
that the appliance has started the heating
phase of the water in the tub.
2.3: Spin value
2.4: Spin speed icons.
• No spin
• Rinse Hold
• Night Cycle
During the spinning phase the spiral is ani-
mated.
No spin option eliminates all the spin pha-
ses and increases the number of rinses for
some programmes.
Rinse Hold: by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. When the
programme has finished the display shows
flashing
, the icon 2.8 is still visual-
ized, the light of button 8 is off and the door
is locked to indicate that the water must be
emptied out. To empty out the water,
please read the paragraph «At the end of
the programme».
Night Cycle: by selecting this option, the
machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all
spinning phases are suppressed, this
washing cycle is very noiseless and it can
be selected at night or in times with a more
economical power rate. On some pro-
grammes the rinses will be performed with
more water. When the programme has fin-
ished, the display shows flashing
the icon 2.8 is still visualized, the light of
button 8 is off and the door is locked to in-
dicate that the water must be emptied out.
To empty out the water, please read the
paragraph «At the end of the programme».
2.1 2.2 2.3
2.4
2.5
, Cold
.
,
2.12
2.11 2.10
2.6 2.7 2.8
2.9
2.5: Option icons: Extra Rinse
Iron
.
2.6: Delay icon
The selected delay set by pressing the rele-
vant button appears on the display for a
few seconds, then the duration of the previ-
ously selected programme is displayed. The
relevant icon is lighted on. The delay time
value decreases by one unit every hour and
then, when 1 hour remains, the time de-
creases every minute.
2.7: Child safety lock
sation» chapter).
2.8: Door locked icon
After you have pressed button 8 and the
machine has started, this icon is lighted on
and only the phase running icon stays on.
When the programme has finished, three
flashing zeros (
this icon disappears.
2.9:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for ex-
ample
). The duration is calculated
automatically on the basis of the maxi-
mum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every mi-
nute.
• End of programme
When the programme has finished three
flashing zeros (
icon 2.8 disappears and the door can be
opened.
• Incorrect option selection
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
of the display for a few seconds and the
integrated red light of button 8 start flash-
ing.
• Alarm codes
or Easy
(see «Personali-
) are displayed and
) are displayed, the
Hide quick links:
Advertisement
Table of Contents
