Edimax EW-7303APn v2 Quick Installation Manual page 16

2. Move mouse and double-click the right button on Network icon. The Network window will appear.
Click Protocol tab from the Network window.
3. Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add button
to install it; otherwise go to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add button.
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the
TCP/IP protocol, it may need the Microsoft Windows CD to complete the installation. Close and go
back to Network dialog box after the TCP/IP installation.
6. Select TCP/IP and click the properties button on the Network dialog box.
7. Select Specify an IP address and type in values as following example.

IP Address: 192.168.2.1, any IP address within
the Wireless LAN Access Point.

IP Subnet Mask: 255.255.255.0
8. Click OK to complete the IP parameters setting.
192.168.2.1
Don't use 192.168.2.1
to 192.168.2.254 is good to connect