Troubleshooting - Whirlpool RF377PXG Use & Care Manual

TROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you
still need help, see "Requesting Assistance or Service" on page 42.
_: i .... _ _3_ ; i _¸ _ _i!_" _ /
i, l IO ,oi,
PROBLEM CAUSE
Nothing works eThe range is not plugged into a properly grounded live outlet with the proper
voltage. (See Installation Instructions.)
• You have blown a household fuse or tripped a circuit breaker.
• The control knob is not set correctly. Push in the control knobs before
turning them.
The oven does not work • You have not set the electronic control correctly. Refer to setting the
electronic oven control section. (See pages 17-19.)
The surface cooking •You have blown a household fuse or tripped a circuit breaker.
areas will not work •The coil elements are not plugged in all the way (Model RF377PXG).
(See "Replacing" on pages 35-36.)
• You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.
PROBLEM CAUSE
The Self-Cleaning cycle • You did not press START/ENTER.
will not work • The door is not closed all the way.
4O