Dual Cooking Zone - Whirlpool RF199LXK Use & Care Manual

,Jl, h = ,
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The control knobs can be set anywhere between HI and LO. Push
in and turn to setting. Use the following chart as a guide when
setting heat levels.
SE'n'ING RECOMMENDED USE
HI • Start food cooking.
• Bring liquid to a boil.
6-8 • Hold a rapid boil.
[MED- HI] • Quickly brown or sear food.
5 • Maintain a slow boil.
[MED] • Fry or saute foods.
• Cook soups, sauces and gravies.
2-4 • Stew or steam food.
[MED- LO] • Simmer.
LO • Keep food warm.
• Melt chocolate or butter.
ACCUSIMMER
TM
• Precise simmer control.
setting
(on some models)
LO • Low simmer or when using lids.
4
• High simmer or simmer without
lids.
Keep Warm
Element
(on some ceramic
glass models)
• Keep cooked foods warm.
REMEMBER: When range is in use or (on some
models) during the Self-Cleaning cycle, the entire
cooktop area may become hot.
The ACCUSIMMER
TM
feature setting is an adjustable heat setting
for more precise simmering. It is the right front surface cooking
area or element.
The indicator light will glow when the ACCUSIMMER
TM
feature
setting is on. When the setting is not on, the right front surface
cooking area or element will function as a single or dual element
(on some models).
To use:
1. Turn the ACCUSIMMER
TM
feature knob from NORMAL
BURNER to the ON position.
NORMAL
tURNER
©
2. Push in and turn the right front control knob ON between the
LO and 4 settings.
Select LO for a low simmer or when using lids and 4 for a high
simmer or when not using lids.
3. Turn the ACCUSIMMER
TM
feature knob to the OFF position
when finished cooking.
I,_141 '00111 _'_!_01@
1
1. Single size (6 in. [15.24 cm])
2. Dual size (10 in. [25.4 cm])
The Dual Cooking Zone offers flexibility depending on the size of
the cookware. Single size can be used in the same way as a
regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware.
1 .......................................... _ 2
';h,iF,4 _uj? '°
ooo
eo
1. Single
2. Dual
To Use SINGLE :
1. Push in and turn the left front control knob counterclockwise
from the OFF position to the SINGLE zone anywhere between
HI and LO.
2. Push in and turn knob to OFF when finished.