Controls - Troy-Bilt Tuffy J689 Operator's Manual

SECTION 4: CONTROLS
A
D
DDD
NN_N
NOTE:
Steering Wheel not shown _r clarity
DDDDD
A Clutch-brake Pedal
B Throttle Control Lever
C Deck Engagement / Lift Lever
Figure 4
D
E
IgnitionSwitch o.
The ignition switch is located on
the right side of the tractor's
dash.To start the engine, insert
the key into the ignition switch
and turn clockwise to the START
position. Release the key into the
ON position once engine has fired.
Refer to Starting The Engine on page 12 of this manual for
detailed starting instructions
WARNING:
Never leave a running
machine unattended. Always disengaged
PTO, Shift into neutral, set parking brake,
stop engine and remove key to prevent
unintended starting.
Ignition Switch
Shift Lever
F Speed Control Lever / Parking Brake
ThrottleControl L ever
The throttle control lever is
located on the left side of the
tractor's dash panel. This lever
controls the speed of the engine
and, when pushed all the way
forward, the choke control also.
When set in a given position, the
throttle will maintain a uniform
engine speed.
Refer to Starting TheEngine on
page 12 of this manual for
detailed starting instructions
c.o.oi ,1
Position
Fast (_
Position
Slow
Position (_
IMPORTANT: When operating the tractor with the cutting
deck engaged, be certain that the throttle lever is
always in the FAST (rabbit) position.
10