Sharp LC-46SV50U Operation Manual page 46

Appendix
The software included in this product is comprised of various software components
whose individual copyrights are held by SHARP or by third parties.
The copyrights for the software components and various relevant documents included
with this product that were developed or written by SHARP are owned by SHARP and are
protected by the Copyright Act, international treaties, and other relevant taws. This product
also makes use of freely distributed software and software components whose copyrights
are held by third parties. These include software components covered by a GNU Generat
Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or
other license agreement.
Some of the open source software ticensors require the distributor to provide the
source code with the executable software components. GPL and LGPL include similar
requirements. For information on obtaining the source code for the open source software
and for obtaining the GPL, LGPL, and other license agreement information, visit the
following website:
http://www.sharpusa.com/gpt
We are unable to answer any questions about the source code for the open source
software. The source code for the software components whose copyrights are held by
SHARP is not distributed.
The following open source software components are included in this product:
• linux kernel/busybox/uClibc/ztib/libpng/tibjpeg
If you forgot the password number, reset the secret number by following the procedures
below:
1. Press MENU
2. Select "lnitialSetup", press "ENTER"
3. Select "Individual Setup", press "ENTER"
4. Press number 7071
5. Select "Secret No."
6. Enter new password
• As a precautionary measure, make a note of your secret number above, cut it from this manual,
and keep it in a safe place.
_- 45