Connecting A Pc (Personal Computer); Viewing An Image From A Pc; Displaying An Image From A Pc; Pc Compatibility Chart - Sharp LC-26DV27UT Operation Manual

Connecting a PC (Personal computer)
. PUT5 (PC) terminals to connect a PC. (When you use HDMI cable, use the INPUT4 (HDMI) terminals.)
• The PC input terminals are DDCl/2B-compatible.
• Refer to "PC compatibility chart" for a list of PC signals compatible with the System.
• Make sure to select the same signal values for the output signal of a PC and the input signal of the TV/DVD set before
connecting with the PC. (See page 24.)
• Depending on the PC being used, images may not be shown without converting the output signals into external output.
Please refer to your PC's manuals regarding converting to external output.
• You can also connect the PC with HDMI cable. If you use HDMt cable, you
don't have to connect the audio cord. If you use HDMt-to-DVI cable, please
connect audio cord as same way as VGA cable.
ToANALOGRGB1
puttermioo, j
'_ (.... mrGcBa ?y blveai, a hie ) V
PC _ 03.5 mm st ..... inijackcable_..._
/ TOr A _ndai/s out put ] (....... ially available) T#pAtUtDIO PC/H DM, ]
Signal names for 15-pin mini D-sub connecter
Pin No. Si,qnal name Pin No. Signal name
(!) m (_) DSUB 5
(_) G (_) GND (Ground)
(_) B @ Not connected
(_ Not connected @ DDOD
(_) DGND (Ground) @ VGAHS
O AGND (Ground) _) VGAVS
0 AGND (Ground) (_) DDOC
(_) AGND (Ground)
To view an image from a PC, perform the following
procedure.
O Select the Input4 (PC) mode using INPUT on the remote
control or the TV/DVD set. (See page 15.)
(_) Select the PC input signal.
(_) Adjust the "Picture" items if the PC image does not come
in clearly. (See page 24.)
PC
720 x 400 31.5 kHz 70 Hz
31.5 kHz 60 Hz ©
VGA
640 x 480 37.9 kHz 72 Hz ©
37.5 kHz 75 Hz ©
35.1 kHz 56 Hz ©
37.8 kHz 60 Hz ©
SVGA 800 x 600
48.1 kHz 72 Hz ©
46.9 kHz 75 Hz ©
48.4 kHz 60 Hz ©
XGA 1,024 x 768 56.5 kHz 70 Hz O
60.0 kHz 75 Hz O
1,280 x 720 44.8 kHz 60 Hz O
WXGA 1,280 x 768 47.8 kHz 60 Hz
1,360 x 768 47.7 kHz 60 Hz O
(_= 25