Fagor VFA-70 S Care & Instruction Manual page 11

OPERATING
Switching off the heat source
Choose 0 power for the heat source when you wish to turn off. If the hotplate is hot, H
will light up indicating the hotplate is still hot.
Residual heat display H
When activated but with level 0, the corresponding displays shows 0 and H alternatively.
While a hotplate is still hot but switched off, the display will show H.
Depending on the power that was used, this display may remain on for up to
approximately 30 minutes.
Do not touch the hotplate or its surrounding area , white "H" is displayed. There is a risk
of burning.
Warning!
If a power outage occurs while the residual heat display is on, remember that when
power is restrored the display will not re-appear even though the hotplate may still be
hot.
11